Firmenblog über ESPRESSIF ESP32-C5-WROOM-1-N16R8 High Integrated Dual-Band Wi-Fi 6 Multi-Protocol Wireless Module

Shenzhen Mingjiada Electronics Co., Ltd. supplies and recycles the ESPRESSIF ESP32-C5-WROOM-1-N16R8, a highly integrated dual-band Wi-Fi 6 multi-protocol wireless module.

In the current era of rapid technological advancement in the Internet of Things (IoT), highly integrated, multi-protocol, high-performance wireless modules have become a cornerstone of smart device development. Shenzhen Mingjiada Electronics Co., Ltd. has specialised in the electronic components sector for many years. Leveraging high-quality supply chain resources and a comprehensive recycling system, we specialise in providing supply and recycling services for the ESPRESSIF (Espressif) ESP32-C5-WROOM-1-N16R8 high-integration dual-band Wi-Fi 6 multi-protocol wireless module. By balancing product quality, supply efficiency and resource recycling, we offer comprehensive component solutions for a wide range of IoT enterprises.

I. Key Features of the ESPRESSIF ESP32-C5-WROOM-1-N16R8 Module

The ESP32-C5-WROOM-1-N16R8 is a high-performance IoT wireless module launched by Espressif. Centred around the ESP32-C5 series chip, it has become the component of choice for sectors such as smart home, industrial automation and consumer electronics, thanks to its dual-band Wi-Fi 6 capability, multi-protocol integration and high memory configuration. Its core features are as follows:

1. Dual-band Wi-Fi 6 support for efficient and stable communication

The ESP32-C5-WROOM-1-N16R8 module supports dual-band Wi-Fi 6 (IEEE 802.11ax) at 2.4 GHz and 5 GHz, utilising a 1T1R architecture with a maximum data transfer rate of 150 Mbps. Compared to previous-generation technologies, the introduction of key technologies such as OFDMA (Orthogonal Frequency Division Multiple Access), MU-MIMO (Multi-User Multiple-Input Multiple-Output) and Target Wake Time (TWT), significantly enhancing network capacity and transmission efficiency. This effectively reduces latency and interference in scenarios involving multiple concurrent devices, whilst maintaining backward compatibility with 802.11b/g/n/ac protocols. It adapts to a variety of network environments, meeting the high-speed communication requirements of IoT devices. Furthermore, the module supports antenna diversity and 802.11mc FTM functionality, further optimising signal quality and positioning accuracy.

2. Multi-protocol integration for all-scenario IoT applications

The ESP32-C5-WROOM-1-N16R8 module integrates multi-protocol communication capabilities. In addition to dual-band Wi-Fi 6, it supports Bluetooth 5 (LE) (Bluetooth Core 6.0 certified), the IEEE 802.15.4 protocol, offering seamless compatibility with Zigbee 3.0 and Thread 1.4, and native support for the Matter protocol. This enables the concurrent operation of Wi-Fi, BLE, and Zigbee/Thread protocols, meeting the interconnectivity requirements of smart devices without the need for additional communication modules. It is widely suitable for multi-protocol device integration scenarios such as smart home gateways, whole-home control centres, and industrial control nodes. Specifically, Bluetooth LE supports a high-power mode of 20 dBm, AoA/AoD direction finding, and periodic broadcast responses, with data rates ranging from 125 Kbps to 2 Mbps, making it suitable for short-range communication and low-power device connectivity.

3. High-performance core for running complex applications

The ESP32-C5-WROOM-1-N16R8 module is equipped with a 32-bit RISC-V single-core microprocessor with a maximum operating frequency of 240 MHz. It features 320 KB of ROM, 384 KB of high-performance SRAM (HP SRAM) and 16 KB of low-power SRAM (LP SRAM). along with 16 MB of Flash and 8 MB of PSRAM (the ‘N16R8’ in the model name denotes 16 MB Flash + 8 MB PSRAM). This ample storage and memory capacity supports the operation of complex applications, multiple firmware storage, file system deployment and remote OTA updates, eliminating the need for additional storage expansion. This significantly simplifies device hardware design and enhances development efficiency.

4. High Integration + Industrial-Grade Design, Suitable for Demanding Environments

The ESP32-C5-WROOM-1-N16R8 module features a highly integrated design with a rich array of peripheral interfaces, including up to 22 GPIO pins. It supports various peripherals such as SPI, UART, I2C, I2S, RMT, PWM, ADC, USB Serial/JTAG, CAN FD and other peripherals, allowing for easy connection to various external devices such as sensors, displays and actuators, thereby meeting diverse application development requirements. Furthermore, the module utilises a compact SMD surface-mount package measuring just 18 × 27.5 × 3.3 mm, with an on-board PCB antenna, facilitating integration into end products with limited space; With an operating temperature range of -40°C to 85°C and an operating voltage of 3.0 to 3.6 V, it offers excellent interference resistance and stability, meeting industrial-grade standards and making it suitable for demanding operating environments such as industrial automation and outdoor equipment.

5. Balancing security and low power consumption to enhance device battery life and reliability

The ESP32-C5-WROOM-1-N16R8 module incorporates comprehensive security mechanisms, supporting Secure Boot, Flash encryption, hardware encryption accelerators (AES/SHA) and TLS/SSL protocols, effectively safeguarding the security of data transmission and storage whilst preventing malicious attacks and data breaches. At the same time, the optimised low-power design, with a deep sleep current of less than 10μA, significantly reduces device power consumption and extends the battery life of battery-powered devices, making it suitable for low-power IoT scenarios such as smart wearables and wireless sensors.

II. Mingjiada Electronics Supply Services: Quality Assurance, Efficiency and Convenience

As a professional supplier of electronic components, Mingjiada Electronics consistently adheres to the philosophy of “genuine products, quality first, and efficient supply”. We provide customers with a one-stop supply service for the ESP32-C5-WROOM-1-N16R8 module, addressing the pain points of corporate procurement and facilitating the rapid launch of products.

1. Genuine Product Guarantee: Eliminating Substandard Goods

All ESP32-C5-WROOM-1-N16R8 modules supplied by Mingjiada Electronics are genuine, original products. Every batch undergoes rigorous quality testing and is accompanied by complete product certifications and test reports. We strictly exclude refurbished, counterfeit, or substandard products to ensure the modules’ performance stability and compatibility, thereby reducing product R&D and production risks for our customers at the source.

2. Ample Stock Reserves, Flexible Response to Demand

Leveraging a comprehensive supply chain system and warehouse management capabilities, Mingjiada Electronics maintains ample stock of ESP32-C5-WROOM-1-N16R8 modules year-round. We can meet the bulk procurement needs of various customers, whether for small-batch sample purchases (for R&D testing) or large-scale mass production orders (for production implementation). We ensure rapid dispatch, shortening procurement cycles and avoiding R&D stagnation or production delays caused by stock shortages. Additionally, we offer customised ordering services, providing bespoke procurement solutions tailored to specific client requirements.

3. Professional Technical Support to Reduce Development Costs

Mingjiada Electronics boasts a professional technical team well-versed in the technical specifications, application scenarios and development considerations of the ESP32-C5-WROOM-1-N16R8 module, enabling us to provide comprehensive technical support services. From module selection consultancy and hardware integration guidance to troubleshooting during the debugging process, we offer expert assistance throughout, helping customers quickly master module application techniques, reduce product R&D complexity and development costs, and accelerate the time-to-market for their products.

4. Competitive Pricing Structure, Enhancing Value for Money

Leveraging the advantages of bulk purchasing and direct supply chain resources, Mingjiada Electronics offers clients highly competitive pricing, minimising procurement costs whilst ensuring product quality. Furthermore, exclusive preferential policies are available for long-term partners, further enhancing the value for money of their purchases and achieving mutual benefit.

III. Mingjiada Electronics Recycling Service

Mingjiada Electronics has simultaneously launched a recycling service for the ESP32-C5-WROOM-1-N16R8 module, focusing on idle modules such as corporate surplus stock, discarded samples and production offcuts to facilitate resource recycling, thereby helping enterprises to revitalise their idle assets.

1. Wide Scope of Recycling, Suitable for Multiple Scenarios

The scope of recycling covers: surplus ESP32-C5-WROOM-1-N16R8 original modules in corporate stock, discarded samples from R&D testing, production offcuts, and idle modules that are undamaged or repairable. Recycling services are available regardless of batch size, flexibly meeting the diverse recycling needs of enterprises.

2. Fair Pricing and a Convenient, Efficient Process

Mingjiada Electronics has established a fair and transparent pricing system for recycling. We set reasonable prices based on factors such as the age, condition and batch size of the modules, ensuring the legitimate rights and interests of our customers. The recycling process is simple and convenient: customers need only contact a Mingjiada Electronics representative to describe the modules to be recycled. Our staff will respond promptly to arrange either a collection service or logistics coordination, ensuring an efficient and hassle-free process that minimises the customer’s time investment.

IV. Mingjiada Electronics’ Core Advantages: One-Stop Service, Hassle-Free Throughout

Compared to other suppliers and recyclers, Mingjiada Electronics’ core advantage lies in its ‘Supply + Recycling’ one-stop service, which balances quality, efficiency and environmental protection to provide customers with a hassle-free, end-to-end solution:

- Full Accreditation: With years of experience in the electronic components industry, we hold all necessary supply and recycling accreditations, ensuring a reliable reputation;

- Comprehensive Service: From product supply and technical support to the recycling of idle modules, we provide a one-stop service, eliminating the need for customers to liaise with multiple partners;

- Rapid Response: Professional staff oversee the entire process—from procurement enquiries and order dispatch to recycling coordination—ensuring swift responses to customer needs;

- Mutual Benefit: On the supply side, we provide cost-effective products and technical support; on the recycling side, we help customers realise the value of their idle assets, achieving mutual benefit for both parties.